Product
Is the surface real White Oak?
Yes. Every panel has a visible surface of real brushed White Oak veneer. It is not a printed wood-look pattern.
What are the panels made of?
MDF slats with a real oak veneer surface, mounted on an acoustic felt backing. Each panel measures 96 in. x 12 in. and covers 8 sq ft.
What comes in a box?
A box contains 2 panels, each measuring 96 in. × 12 in. Together they cover 16 sq. ft.
Will every panel look exactly the same?
No – and that is part of the beauty of real wood. Natural differences in grain, tone and appearance are expected and give each installation its own character.
Do I need to apply a finish to the panels?
No, it isn’t necessary. But you can apply any finish you like. Just test it on a small area of the panel first.
How do I clean the panels?
Remove dust with a microfiber cloth. Use a slightly damp cloth for marks or scuffs.
Installation and Care
Should I use adhesive or screws?
Choose the method to suit your wall. On suitable surfaces, apply construction adhesive in waves or dots, then align the panel and press firmly. For a removable installation, uneven surfaces or added security, use suitable screws through the felt.
How do I cut the panels?
Cut the slats with a fine toothed saw and the felt with a sharp knife. Our EasyCut technology keeps the slats bonded to the felt after cutting.
Can I install the panels without a professional?
Yes. The panels are designed for DIY installation. A feature wall usually takes a few hours with standard tools, and our guides and videos explain each step.
Do I need DIY experience?
No. Our guides start with the basics and are written for beginners.
Do I need special tools?
No. You need standard screws and mounting adhesive, and both are available in our installation range. The panels can be fixed to battens or directly to the wall.
How can the panels be installed?
There are 3 options:
- Adhesive. Glue the panels to the wall with construction adhesive.
- Screws. Screw the panels directly to the wall with at least 9 screws per panel. Use screws that match the felt color. On ceilings, screw into the joists.
- Battens. Mount the panels on 1¾ in (45 mm) wood battens and fill the space behind them with mineral wool. This method gives the best sound absorption.
Which walls are suitable?
Most walls, including brick, concrete and drywall.
Can the panels be installed on a ceiling?
Yes. They can go on walls and ceilings. Our ceiling guide shows which fixings to use.
How do I fit the panels around outlets and windows?
Measure the opening first. Then cut the slats with a saw and the felt with a utility knife for a close fit.
Can cables run behind the panels?
Yes. If you may need to reach the wiring later, we recommend mounting the panels on battens.
How should the panel edges be finished?
The edges are designed to be visible. Trim any extra felt for a flush edge. [The slats are colored all the way through], so cut ends match the rest of the panel.
Features
Do the panels improve room acoustics?
Yes. The felt backing and the gaps between the slats absorb sound and reduce echo.
Can the panels be used outdoors?
No. They’re for indoor use only.
Can the panels be installed in a kitchen?
Yes, as long as they don’t come into direct contact with water.
Are the panels suitable for rental homes?
Yes. When they’re mounted on battens, you can take them down without major damage. You’ll only need to fill the screw holes.
General
Where are Bricous panels made?
Bricous acoustic slat wall panels are proudly made in Grand Rapids, Michigan.
Will the panels soundproof my room?
The panels are designed to improve sound within the room by helping absorb and diffuse it. They reduce echo; they are not a complete soundproofing system for blocking sound between rooms.
Where can I use the panels?
Bricous panels are designed for interior walls and ceilings in spaces such as living rooms, bedrooms, dining rooms, offices, studios and commercial interiors. Use the installation method appropriate for the surface and application.